|
Post by David Lawson on Jun 1, 2012 3:38:44 GMT -5
I was at a race meeting at Donington Park a few years ago and had a good look at this restored OSCA, when the driver opened her up and raced through the paddock I got the full impact of the engine noise and there and then decided I had to build a slot car version of this car. Bira at the wheel of the OSCA My car has a balsa carved bodyshell although I did cast a few resin copies. Front motored scratchbuilt chassis to provide room for the driver which is one of my Airfix soldier conversions and using Milliput to make the drivers cap - I made Bira's prescription goggles out of fuse wire with blobs of tinted epoxy for the lenses. David
|
|
|
Post by Chris Wright on Jun 1, 2012 11:11:58 GMT -5
David that is my favorite slot car of all time it captures the essence of the real thing.
chris
|
|
|
Post by David Lawson on Jun 2, 2012 4:35:09 GMT -5
You are too kind but thank you.
David
|
|
|
Post by Mark Huber on Jun 2, 2012 9:06:11 GMT -5
Excellent detailing David. What sort of finish / paint did you use on that gleaming grill?
|
|
|
Post by David Lawson on Jun 12, 2012 8:55:44 GMT -5
Mark
I opened up the resin in the grill then Bare Metal Foiled it and backed the grill with some fine mesh.
David
|
|
|
Post by brucebook on Oct 27, 2012 7:21:00 GMT -5
Due to the fact that he is very nice man, David allowed me to do a swap a couple of years ago; an OSCA for a 4.CLT that I had made. Hence, I too have a light blue and yellow one (but nowhere near David's standard) but also I was able to create a 'factory' version as well.
|
|