|
Post by Mark Huber on Aug 25, 2014 11:09:43 GMT -5
Dave Wisdom completed the scrutineering prior to Race 1. Thank you Dave! The wheelbases and maximum allowable widths were posted in the Rules thread. One correction. The BRM P83 has an actual scale WB of 76mm. Out of compliance conditions have been highlighted below. I did not penalize cars if the wheelbase was too short, but anything over the +2mm was a violation. The same applied for maximum width which was the LESSOR of either 58mm or the adjusted scale width. Adjusted scale width is defined as the scale rear track +11mm allowed for the maximum tire width + 2mm allowance. I have added the other build data as I found it in the car build threads on this forum, but I probably missed some information. I would appreciate all of your help is filling in the blanks. Just post the information below and I will update the charts.. I hope we will have a complete data sheet before the series ends. If there are any errors in the build information, please let me know and I will correct it.
|
|
|
Post by Phil Kalbfell on Aug 25, 2014 17:29:14 GMT -5
From memory : Tyres : Tassie Resinn F NSR Super grip rear Classic, Wheels BWA, Slot it gears, 9/ 24. Motor is SRP ( I think) I had a 20,000 Scaleauto in the car But it thru a winding during test so I had to look in the used motor box and found one that I had tested at 19,500 so assume it was a good SRP!
|
|
|
Post by old23 on Aug 28, 2014 22:05:21 GMT -5
Mark, my missing data (included with the car):
Tires Front - Paul Gage Tires Rear - NSR Ultragrip Wheels (all) - BWA Gears - BWA 9 : Slot.it 24 Motor - Scalextric FF050 (as in their F1 cars)
|
|
|
Post by David Lawson on Aug 29, 2014 1:33:10 GMT -5
I am working from memory as I built the car last year but I'm pretty certain that the Cooper-BRM T86B has...
NSR tyres BWA wheels Slot it 9/28 gears Scalextric FF050 18,500
David
|
|
|
Post by Mark Huber on Aug 29, 2014 8:48:34 GMT -5
Thank you guys for the data. I've updated the tech sheet. Still a few mystery components for some of the entries--I prefer not to guess from the pictures, as more often than not I'd be wrong!
|
|
|
Post by slo on Aug 29, 2014 15:02:50 GMT -5
XPGs' on the rear of the Stubbings/Loader entry Mark.
|
|
|
Post by Taffy on Aug 30, 2014 10:34:18 GMT -5
Hello, Mark,
sorry for my late answer!
Here are the details to complete the tech sheet of Stewart´s Matra:
Tyres: F+R: Ortmann´s Wheels: F: Plafit, R:? Gears: Scalextric/Sigma Gear Ratio: 9:28 Motor: Scalextric 0050 18500
|
|
abbo
John Love
Posts: 28
|
Post by abbo on Sept 1, 2014 6:50:33 GMT -5
Missing data for my Lotus 49 ... Tyre Type: Front - Scalextric, Rear NSR Wheels: Front Scalextric, Rear NSR Gear ratio: 9/?? (I can't remember which gear I settled for, I think it was a 24)
Marc Abbott
|
|
|
Post by Aurora on Sept 5, 2014 11:21:13 GMT -5
Correction for #14 Honda RA300: Pinion Gear is BWA 8 tooth. Guide is Slotit SICH83 LMP Screw Pickup
|
|