|
Post by David Mitcham on Nov 17, 2014 15:17:47 GMT -5
Hi
Can anyone suggest where I might purchase a driver head in a full-face helmet, preferable early 70s style and without a visor, please? I've been looking at all the usual suppliers and there is nothing I can find that really fits the bill.
Best Regards
David
|
|
|
Post by David Lawson on Nov 18, 2014 4:23:49 GMT -5
David
Check the MRRC spares on Pendles site, they do a full length driver figure with a full face helmet minus visor.
David
|
|
|
Post by David Mitcham on Nov 18, 2014 6:28:33 GMT -5
Thanks David, I had seen that but wasn't all that impressed but I'm probably being too picky!! I'll probably give it a try.
Best Regards
David
|
|
|
Post by Ember on Nov 19, 2014 23:00:25 GMT -5
Actually there is a dearth of good heads for modern use.
I've had a request to do two modern 1/24 drivers for someone as well as a 1/32. They just done seem available in any scale.
|
|
|
Post by David Lawson on Nov 20, 2014 4:28:16 GMT -5
Not really a subject for this forum but Fujima does a nice set of 1/24 scale driver figures including one with an excellent full face helmet.
For 1/32 scale full face helmets I use and improve ones from old cheap bodyshells picked up at toyfairs or Scalextric swapmeets.
David
|
|
|
Post by Andrew Rowland on Nov 21, 2014 3:11:22 GMT -5
The best one in my view is the 1970's Matchbox static Surteees kit head and body. It has been cast and recast many times. When Maxi Models stopped making new parts I bougt up all his stock to ensure i had a few but sadly they are now close to finishing too.... DNQ Simon does a casting of the head. Not the best but a start? Cheers Andi
|
|
|
Post by David Mitcham on Nov 21, 2014 6:29:55 GMT -5
Thanks everyone. At least I know it wasn't my inadequate Googling! I'm sure I'll sort something out.
Best Regards
David
|
|
|
Post by Ember on Nov 21, 2014 18:02:18 GMT -5
I believe Immense Miniatures have the intention of doing a modern head or heads. But of course that doesn't solve the current need.
|
|
|
Post by munter on Mar 27, 2015 23:51:30 GMT -5
Not a great pic, taken at night in the workshop but I have some of these sitting around...I must find the mould and do a few more.
|
|
|
Post by David Mitcham on Mar 28, 2015 0:36:45 GMT -5
Hi John
I'd be interested in two or three if you do mould some more.
Best Regards
David
|
|
|
Post by munter on Mar 29, 2015 2:10:29 GMT -5
OK David, let me see what I can put together.
|
|
|
Post by datto on Mar 4, 2016 20:18:53 GMT -5
If people are still looking for full-face helmets, we have them now...
|
|