|
Post by Andrew Rowland on Jul 24, 2017 14:22:28 GMT -5
Hi guys, i've only ever made one and that was a piece of the original resin mould carefully cut off.
So how do you all go about making the mould for a windscreen vac former please?
I have the vac former already!
Cheers Andi
|
|
|
Post by Phil Kalbfell on Jul 24, 2017 16:20:33 GMT -5
I usually start with a piece of MDF,, shaped then seal it make one vac form then pour the master in fiberglass resin and polish to a good finish.
|
|
|
Post by munter on Jul 25, 2017 1:22:34 GMT -5
I do the same as Phil except I use a balsa block,shaped,sanded,primed,filled and smoothed some more. I only need one successful pull before back pouring a resin copy or two. The resin handles the heat better in my experience.
|
|