|
Post by 73emgee on Nov 11, 2020 7:52:03 GMT -5
Looking for some recommendations on materials to use to represent brake hoses for suspension detailing. Specifically for cars in the 1960's.
|
|
|
Post by Andrew Rowland on Nov 16, 2020 3:06:52 GMT -5
I use 0.5mm brass rod / wire. Painted semi gloss black. Andi
|
|
|
Post by 73emgee on Nov 16, 2020 8:10:34 GMT -5
Thanks Andi, I see if I can find some wire and try it. Any problem with the paint coming off when bending?
|
|
|
Post by Peter Seager-Thomas on Nov 16, 2020 10:12:58 GMT -5
Bend them first?
Peter.
|
|
|
Post by David Mitcham on Nov 16, 2020 14:00:50 GMT -5
Hello Bob
Apologies for coming to this late. I use fishing line painted black with acrylic paint. It bends nicely and the paint doesn't come off and dab of supper glue will fix it in place. And its lighter than wire.
Best Wishes
David
|
|
|
Post by 73emgee on Nov 17, 2020 11:03:58 GMT -5
Thanks David, I don't know why I didn't think of that. I have plenty fly fishing leader material to pick from.
|
|
|
Post by Peter Seager-Thomas on Nov 17, 2020 13:09:37 GMT -5
Hello Bob Apologies for coming to this late. I use fishing line painted black with acrylic paint. It bends nicely and the paint doesn't come off and dab of supper glue will fix it in place. And its lighter than wire. Best Wishes David There is the bonus of course as being more resilient than wire. Peter.
|
|
|
Post by mark cooke on Dec 3, 2020 16:47:21 GMT -5
just getting back into slot racing after 30 years i have loads of 1960s scalextric cars [some race tuned ] and some modern cars catrix etc i like the 60s style i have no power supply or controllers can anyone suggest condolers and power supply all my cars as not sure if they need different voltage etc please help
|
|
|
Post by f143 on Dec 4, 2020 19:15:34 GMT -5
This post and the one above may need redirecting?
I have a home use Professor Motor electronic controller that I like better than the provided scalextric Ninco or Policar hand controls, inexpensive and well made. Regards Nigel
|
|