|
Post by f143 on Jun 23, 2014 21:16:25 GMT -5
Caught testing!
Honda 273. Regards Nigel
|
|
|
Post by old23 on Jun 24, 2014 11:23:36 GMT -5
On a lonely stretch of road in Western Australia the silence of dawn is suddenly shattered by twelve screaming cylinders at maximum revs....
|
|
|
Post by f143 on Jun 25, 2014 5:13:28 GMT -5
Ha ha, yes Stewart, after numerous chilly nights in the workshop testing ready for August despatch. My representation of the RA273. Regards Nigel
|
|
|
Post by Mark Huber on Jun 25, 2014 9:17:17 GMT -5
Good show Nigel, I started a new thread for you!
|
|
|
Post by f143 on Jun 25, 2014 22:55:45 GMT -5
Thanks Mark. My car is more a freehand effort which doesn't show up well to the details of close up photography! Nigel
|
|
|
Post by f143 on Jul 16, 2014 21:05:30 GMT -5
Chassis: Scratch built wire and brass Guide: Ninco Motor: Scalextric Standard 050 Inserts: DArt Hobbies Wheels: BWA / DArt Front Tires: DART Rear Tires: NSR Gears: Slot-it 24 tooth Crown 9 tooth Scalextric pinion Driver: Body: Balsa self made body
Regards Nigel
|
|
|
Post by Taffy on Jul 18, 2014 13:45:49 GMT -5
Body: Balsa self made body Nigel, that´s great! I ever thought about beginnig with carving balsa wood, but I fear to cut into my fingers (and they are the most needed tool in my work), and, because I´m not used to handle the material, I believe, it is more difficult to get the right shape of a car, than using resin. I admire that, and I wish you good luck for the races. My best regards
|
|
|
Post by f143 on Jul 20, 2014 19:59:13 GMT -5
Thank you Taffy, I hope it looks OK when on the grid with the rest of the cars, so many well presented models like your Matra. Regards Nigel
|
|